Pressure Sensor
NP43
 |
Model Description： 
NP43 Series Specification：
| Project | Unit | NP43P (Positive Pressure) |
NP43V (Negative Pressure) |
NP43C (Continuous Pressure) |
|||||
| Pressure Unit Setting Minimum Scale |
kPa | - | 0.1 | ||||||
| Mpa | 0.001 | - | |||||||
| kgf/ cm2 | 0.01 | 0.001 | |||||||
| bar | 0.01 | 0.001 | |||||||
| psi | 0.1 | 0.01 | |||||||
| inHg | - | 0.1 | |||||||
| mmHg | - | 1 | |||||||
| Environment Resistant |
Protection Class | IP40 | |||||||
| Ambient Temperature | Action: 0 ~ 50℃，Save：-10 ~ 60℃ (Without Dew And Freezing Conditions) |
||||||||
| Ambient Humidity | Action and Save：35 ~ 85% RH (No Water Dew) |
||||||||
| Withstand Voltage | 1000 V AC One Minute | ||||||||
| Insulation Resistance | 50Ω Above (500V DC) (Between Lead And Plastic Case) |
||||||||
| Vibration Resistant | Complex Amplitude 1.5mm， Every Minute 10Hz ~ 55Hz ~ 10Hz， X、Y、Z 2 hours each direction |
||||||||
| Shock Proof | 100m/s2 (10G) X、Y、Z 3 times in each direction | ||||||||
| Response | Single point setting mode | Adjustable (Note 1*) | |||||||
| Hysteresis Mode | |||||||||
| Window Compare Mode | |||||||||
| Rated Pressure Range | 0.000 ~ 1.000 MPa |
0.0 ~ -101.3kPa |
-100.0 ~ 100.0 kPa |
||||||
| Set Pressure Range | -0.100 ~ 1.000 MPa |
10.0 ~ -101.3kPa |
-101.0 ~ 101.0 kPa |
||||||
| Pressure Resistant | 1.5MPa | 300kPa | |||||||
| Applicable Gas | Air (non-corrosive, non-flammable) | ||||||||
| Voltage and Current | 12 ~ 24V DC +-10%， Ripple Peak 10% The Following |
||||||||
| Current Consumption | ≦ 40mA (When No Load) | ||||||||
| Switch Output | 2NPN Open Collector Output |
2PNP Open Collector Output |
|||||||
| Maximum Load Current： 125 mA |
Maximum Load Current： 125 mA |
||||||||
| Maximum Supply Voltage： 30V DC |
Maximum Supply Voltage： 24V DC |
||||||||
| Internal Pressure Drop： 1.5V以下 |
Internal Pressure Drop： 1.5V以下 |
||||||||
| Repeat Accuracy | +- 0.2% F.S. +- 1 digit The following | ||||||||
| Output Short Circuit Protection | Have | ||||||||
| Show | 3 Colors (Red/Green/Orange) (Sampling Rate: 5 Times/Sec) |
||||||||
| Display Accuracy | +- 2% F.S. +- 1 digit (Ambient Temperature 25+-3℃) |
||||||||
| Action Indicator | Orange (1&2 Indicator Light) OUT 1/ OUT 2 |
||||||||
| Linear Analog Output (Voltage Output) (Note 2*) |
The Output Voltage: 1 ~ 5V +-2.5% F.S. (Within The Rated Pressure Range) |
||||||||
| Linearity: +-1% F.S. | Output Pressure Resistance Approx. 1kΩ |
||||||||
| Linear Analog output (Current Output) (Note 3*) |
Output Current: 4 ~ 20 mA +-2.5% F.S. (Within The Rated Pressure Range) |
||||||||
| Linearity: +-1% F.S. | |||||||||
| Load Impedance Max.: 300Ω at a voltage of 12V，600Ω at a voltage of 24V |
|||||||||
| Minimum Load Impedance: 50Ω | |||||||||
| Reaction Time | ≦ 2.5ms | ||||||||
| Misuse Prevention Function: 25ms, 100ms, 250ms, 500ms, 1000ms,1500ms Optional |
|||||||||
| Temperature Characteristics | +-2.5 %F.S. Compare Reference Temperature 25℃ ( 0 ~ 50℃ Temperature Range) |
||||||||
| Takeover Diameter | F1: R1/8", M5; F2: NPT 1/8", #10-32UNF; F3: G1/8" (BSPP), M5 |
||||||||
| Wire Gauge | Oil Resistant PVC Electric Wire (0.15mm2) | ||||||||
| weight | About 80 grams (2m cord included) | ||||||||